Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why New Orleans Homeowners Choose Carrier Air Duct Cleaning
We provide independent Carrier air duct cleaning, repair and service in New Orleans. Our technicians work on Carrier air handlers, fan coils, gas furnaces and condenser-matched split systems every week, and our whole focus is the ductwork and air side of those systems: cleaning, sealing, repairing and upgrading filtration. We are an independent service provider, not affiliated with or authorized by Carrier.
Carrier equipment fills New Orleans attics and commercial ceilings, so the same cabinet, plenum and flex-run layouts come up again and again. That pattern familiarity is what makes a diagnosis fast and a cleaning scope honest. Our technicians have up to 14 years of experience, and every job uses Rotobrush rotary brush agitation plus Nikro HEPA capture. Call (833) 749-5104 for a free estimate.
Key Takeaways
- Independent Carrier specialists, not a Carrier dealer and not authorized by Carrier.
- Rotary brush agitation plus HEPA capture on every job: both steps, every time.
- Evaporator coil cleaning, duct sealing and return duct cleaning are core to our Carrier work.
- Repair and reseal first; replacement only when a coil or cabinet has physically failed.
Why Trust New Orleans Duct Cleaning for Your Carrier Air Duct Cleaning?
New Orleans Duct Cleaning specializes exclusively in ductwork and indoor air quality. We do not install or repair compressors, refrigerant circuits or gas valves. That focus is the point: a Carrier Performance air handler or Infinity variable-speed unit has a specific cabinet shape, a specific coil arrangement and a specific return-drop geometry, and we see those details often enough to know where they leak and where debris collects before we open anything.
Our tools match the work. Rotobrush rotary brush systems agitate debris off duct walls that a vacuum alone cannot move. Nikro HEPA vacuum equipment captures what the brush frees instead of pushing it back into the living space. Abatement Technologies air filtration equipment brings a remediation-grade capture standard into a residential attic. We are authorized to supply and install Honeywell and Aprilaire whole-home air quality products, so filtration can be upgraded at the same appointment. Guardsman-grade protective products are part of the offering for lasting results.
Warranty-safe practice matters on Carrier equipment. We do not disturb sealed refrigerant circuits, we do not cut into cabinets without resealing them properly, and we document what we found and what we changed. In a humid New Orleans attic, a sloppy reseal is a warranty conversation waiting to happen.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Carrier Air Duct Cleaning Problems We Fix in New Orleans
Carrier systems have recognizable failure patterns here. These are the ones we run into most.
- Low-speed coil loading on variable-speed air handlers. Infinity and Performance variable-speed air handlers spend most of their run time at low airflow. When the coil face moves less air, lint and biological film build up on it instead of blowing past, and the system quietly loses capacity before anyone hears a complaint. Owners usually notice rising humidity and weak airflow, not a breakdown.
- Foil-faced internal duct board and lined plenum transitions breaking down. Carrier’s factory foil-faced duct board and fiberglass-lined plenum transitions take a beating in a humid attic. The facing separates, fibers shed into the supply stream, and seams open into bypass gaps. That means conditioned air never reaches the room and unfiltered attic air gets pulled in.
- Cracked mastic at cabinet-to-plenum and return-drop joints. Those connections are sealed with tape and mastic, and both crack under attic heat cycles and humidity. Once a joint opens, the return pulls hot attic air and insulation particles straight into the airstream.
- Pressure-switch and static-pressure faults on communicating Infinity systems. A dirty return path or a crushed flex run restricts airflow, and the communicating controls read that as an equipment fault. Owners hear “system problem” when the real cause is ductwork. Verifying static pressure after any cleaning or reseal is how we separate the two.
- Matted return filters and collapsed flex in retrofit runs. Shotgun houses and raised Creole cottages often have flex duct jammed through tight wall cavities and odd angles. Flex that kinks or sags chokes the return, the filter loads faster, and the coil film problem above starts sooner.
Carrier Parts & Our Repair-vs-Replace Approach
Parts selection on Carrier equipment follows one rule: the part that fits correctly wins. Where a Carrier-specific transition, cabinet panel or filter rack is needed, an OEM part fits correctly and is worth the wait. For sealing, insulation, flex and standard vent hardware, quality aftermarket materials perform identically at lower cost, so we use them. We do not claim to stock or carry genuine Carrier parts.
Repair versus replace is usually not a hard call. Carrier air handlers and coils are repairable and well supported, so the honest answer is almost always repair and reseal. Replacement only makes sense when a coil or cabinet has physically failed: a rusted-through pan, a cracked casing that cannot be sealed, a coil that will not hold. Anything short of that, we fix. Call (833) 749-5104 and we will tell you which side of that line your system is on.
Our Carrier Service Process – Step by Step
- 1
Diagnosis. We inspect the Carrier air handler, coil face, plenum transitions and every accessible return. Static pressure readings get taken before anything is cleaned, because a variable-speed system at low airflow tells you more through pressure than through sound.
- 2
Cleaning and repair. Rotobrush rotary brush agitation runs through the supply and return runs, with Nikro HEPA capture holding what comes loose. Where the coil face is matted, we clean it. Where mastic has cracked at the cabinet or return drop, we reseal it properly.
- 3
Air quality upgrade if wanted. Since we supply and install Honeywell and Aprilaair whole-home products, filter racks and media cabinets go in the same visit rather than a second appointment months later.
- 4
Verification. We re-check static pressure after cleaning and resealing so the low-speed stages behave as designed. If a fault code was present, we confirm whether it cleared.
- 5
Documentation. Before-and-after photos of your own ducts, a written record of what was sealed or repaired, and a clear note on anything we flagged but did not touch. That record is what protects your Carrier warranty position.
See the difference
Before
After
Before
After
Before
AfterCarrier Products We Service & Install in New Orleans
We service Carrier Performance series air handlers and fan coils, Infinity series variable-speed air handlers with communicating controls, Comfort series 80% and 90%+ gas furnaces, and WeatherMaker and 24ACC/24ABC-style condenser-matched split systems. The work on each is air-side: duct cleaning, return duct cleaning, duct sealing, evaporator coil cleaning and filtration upgrades, whether it is a single air handler in a camelback or a bank of units in a commercial ceiling.
New Orleans’ humidity is the constant. AC systems here run through a long cooling season, so ducts stay damp and the coil face stays wet. Add the city’s housing stock, where ductwork is retrofitted into attics, crawlspaces and wall cavities with short runs and odd angles, and standard truck-mounted vacuum approaches often do not fit. Custom agitation and capture is what the work actually requires here.
We Also Service These Brands
Carrier is a specialty, not a limit. We also work on Lennox and Trane systems, and the same Rotobrush, Nikro and Abatement Technologies process applies to all three. Multi-brand capability means you are not stuck when a property has mixed equipment or when a brand changes hands between owners. One call covers your ducts, your dryer vent and your air quality system.
FAQs – Carrier Air Duct Cleaning Service in New Orleans
No. We are an independent Carrier service provider, not a Carrier dealer and not authorized or factory-certified by Carrier. What we bring is pattern familiarity from working on Carrier equipment in New Orleans attics and commercial ceilings, plus professional-grade Rotobrush, Nikro and Abatement Technologies machinery. Nothing we publish implies manufacturer endorsement.
Yes. Where a Carrier-specific transition, cabinet panel or filter rack is required, we use an OEM part because the fit matters. For sealing, insulation, flex and standard vent hardware, quality aftermarket materials perform the same at lower cost. We do not stock or sell genuine Carrier parts, and we will tell you plainly which category a part falls into before we order it.
Most residential Carrier air duct cleaning jobs take a few hours, and a job with coil cleaning, duct sealing and return duct resealing runs longer. Commercial work is scoped per system. The written estimate sets the scope and the price, so there are no surprises once the technician is on site.
We cover Carrier Performance series air handlers and fan coils, Infinity series variable-speed air handlers with communicating controls, Comfort series 80% and 90%+ gas furnaces, and WeatherMaker and 24ACC/24ABC-style condenser-matched split systems. Our work is air-side: duct cleaning, coil cleaning, sealing, repair and filtration upgrades. Call (833) 749-5104 to confirm your setup.
It is usually the ducts. A restricted return path, a crushed flex run or a dirty coil raises static pressure until the communicating controls flag a fault, and the equipment itself may be fine. We measure static pressure before and after cleaning and resealing, which tells us whether the fault clears without touching the equipment. Call (833) 749-5104 for an exact quote on the diagnostic and cleaning scope.
Low airflow plus high humidity. Variable-speed Carrier air handlers run at low speed for long stretches, so the coil face moves less air and lint and biological film settle instead of blowing through. Cracks in mastic at the cabinet and return drop make it worse by pulling unfiltered attic air into the return. Call (833) 749-5104 and we will check the coil, the filter rack and the return seals in one visit.
It can, and in New Orleans it often does. Ducts stay damp through a long cooling season, and foil-faced duct board that has broken down or a coil face carrying biological film will put a musty smell into every supply register. Cleaning and proper resealing addresses the source rather than masking it. Call (833) 749-5104 for a free estimate.
Yes, where an OEM part is genuinely needed. A Carrier-specific transition, cabinet panel or filter rack is ordered to fit. Sealing, insulation and flex work uses quality aftermarket materials that perform identically. We will not tell you a part is Carrier genuine when it is not.
Cleaning is usually worth it. Carrier air handlers and coils are repairable and well supported, which means the honest call is nearly always repair and reseal. Replacement only when a coil or cabinet has physically failed. Cleaning and sealing an older Comfort series system is far less expensive than a replacement, and it fixes the airflow and humidity complaints that made you look. Call (833) 749-5104 for an exact quote.
Prices are set per job by the written estimate, not per vent. Whole-system cleaning is quoted against the layout we actually find: a raised cottage in Mid-City with retrofitted flex and a crawlspace return is a different scope than a single air handler in a camelback. We do not quote teaser coupon figures, because the low price that becomes a larger invoice on site is exactly the problem we work against. Call (833) 749-5104 for a free estimate.
Book Your Carrier Service in New Orleans, LA
Carrier equipment in a New Orleans attic asks for air-side work that matches how it actually runs: low airflow, damp ducts, and plenum seams that open under attic heat. We clean it with Rotobrush and Nikro, seal what has cracked, and document the result with photos. Call (833) 749-5104 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at New Orleans Duct Cleaning.