Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Chalmette, LA
We provide independent Lennox service across Chalmette, from full-system duct cleaning and evaporator coil cleaning to duct sealing on the flex runs behind your registers. What makes our Lennox work here different is the local factor: much of this town was rebuilt or raised after Katrina, so a lot of Lennox systems sit on ductwork under twenty years old that owners assume is fine. It usually isn’t, because that ductwork runs through open attics and pier-level crawlspaces that pull in humid Delta air. We’re an independent shop, not authorized, sponsored or endorsed by Lennox, and we know how these systems behave in Chalmette. Call (833) 749-5104 for a free estimate.
Why Chalmette Residents Choose Us for Lennox Service
We’re an independent Lennox service provider. That means we work on the equipment every day without needing the manufacturer’s blessing, and we say plainly what we find. The failure modes on Lennox air handlers and coils are familiar to us: how the cabinet sits, where the return pulls from, how the plenum ties into the trunk, what a wet coil looks like after a humid summer.
In Chalmette, that familiarity matters more than usual. Post-Katrina rebuilds ran flex duct fast, and thin mastic coverage at the register boots is common. We choose quality parts that fit your Lennox equipment, whether that’s an OEM coil, a blower motor or a Healthy Climate filter, and spec-compliant aftermarket flex, mastic and insulation where the duct side calls for it.
Scheduling is straightforward. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. When you call, you get a free estimate and a flat price per system agreed before any work starts.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Chalmette
These are the Lennox issues we run into most in Chalmette, and the local conditions that drive them.
- Mold and musty odor in supply trunks and flex runs. Lennox air handlers in raised Chalmette homes often draw from attic or crawlspace ductwork that condenses humid Delta air. The smell doesn’t come from the filter. It comes from biological growth on the duct interior.
- Wet, matted insulation on the evaporator coil and blower wheel. When return ducts pull from humid crawlspaces after storm moisture intrusion, the Lennox coil and blower get wet. That invites growth and restricts airflow.
- Duct leakage and disconnected flex at plenum and register boots. Post-Katrina rebuilds often have flex duct run with thin mastic coverage. Loose joints leak conditioned air into the attic and pull outside humidity in.
- Restricted airflow and coil icing on Lennox Merit and Elite systems. Lint and debris-loaded returns that were never cleaned after renovation dust settled choke the system. A starved coil ices.
- Poor humidity control and high energy bills. Leaky, moldy ductwork makes a working Lennox system run longer than it should. Cleaning and sealing often restores performance without replacing equipment.
Lennox Service in Chalmette: What Local Conditions Mean for Your Equipment
Because so much of Chalmette’s housing was rebuilt or elevated after Katrina, a large share of the Lennox systems here sit on ductwork installed within the last two decades. Owners reasonably assume that means it’s fine. It usually isn’t, and the reason is geography. Flood-zone construction leaves many pier-raised homes in Chalmette with attic and crawlspace ductwork that stays open to humid outside air. In a subtropical climate with high humidity year-round and frequent heavy rainfall, that open ductwork condenses. Moisture builds inside the insulation. Mold follows.
In nearby Arabi and along the streets around Chalmette’s older core, we see the same pattern: a Lennox Merit or Elite system cooling unevenly because half its flex runs are sweating in the attic. A typical job starts with a video inspection of the trunk and branch runs. From there, the coil, blower and full duct system get cleaned, and the leaky joints and boots get sealed and re-insulated so the ductwork stops drawing outside humidity. That’s the piece most homeowners don’t expect, and it’s why we repair what others only report.
Lennox Models & Products We Service in Chalmette
We service the residential Lennox equipment found across Chalmette: the Merit Series lines (ML14XC1, ML16XC1 and related equipment), the Elite Series (EL16XC1, EL18XCV and Elite gas and electric packages), and the Dave Lennox Signature Collection (XC21, SL280V, SLP98V). We also handle Lennox Healthy Climate air filtration and duct-mounted accessories as part of the same appointment.
Parts decisions depend on the job. Where fit and airflow matter, an OEM Lennox coil, blower motor or Healthy Climate filter is the right call. On the duct side, spec-compliant aftermarket flex, mastic, insulation and vent caps do the job. We’re independent, so the recommendation follows the equipment, not a manufacturer’s program.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Chalmette
Pricing is set per job by the written estimate, so the number you see is the number you pay. The free estimate includes a video inspection of the trunk and branch runs and an assessment of the coil, blower and insulation. What drives the cost is the number of systems, the length and condition of the duct runs, how much mold and moisture we find, and whether duct sealing or re-insulation is part of the work.
| Service | Typical scope |
|---|---|
| Full system cleaning | Full duct system, coil and blower; Rotobrush rotary brush agitation plus Nikro HEPA capture |
| Evaporator coil cleaning | Coil and blower wheel decontamination; airflow restoration |
| Duct sealing | Sealing leaky plenum and register boot joints; re-insulating wet flex runs |
We don’t quote a per-vent price or a teaser coupon figure. Call (833) 749-5104 for a free estimate and an exact number for your Lennox system.
Serving Chalmette, LA – Our Local Coverage Area
We serve Chalmette and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Chalmette
Because raised pier construction leaves the attic and crawlspace ductwork open to humid Delta air, which condenses inside the insulation and feeds mold on the coil and duct interior. That’s specific to how these homes are built here, not a feature of the Lennox equipment itself.
Yes, often. Newer ductwork in Chalmette can still be moldy and leaky because of humidity, not age. A video inspection tells you whether the runs are clean or carrying growth. Call (833) 749-5104 for an exact quote. Estimates are free.
Yes. Debris-loaded returns starve the Lennox coil of airflow, and a starved coil ices. Cleaning the full system and the coil usually restores normal operation without replacing the equipment.
Usually, yes. Sealing and re-insulating the leaky joints and boots is the first move when the flex duct itself is sound. Replacement is only warranted when the duct, coil or heat exchanger is genuinely compromised.
No. We are an independent Lennox service provider. We’re not authorized, sponsored or endorsed by the manufacturer. We work on Lennox equipment regularly and use quality parts that fit it.
It’s priced per system by a written estimate, so we don’t quote a coupon figure or a per-vent price. The free estimate includes a video inspection and a clear scope. Call (833) 749-5104 for an exact quote. Estimates are free. For more on the Lennox equipment we service, or to learn about our work across Chalmette, see those pages.
Service Areas Near Chalmette
We also serve homeowners in New Orleans, Terrytown, Gretna, Timberlane and Harvey. If you’re in one of these areas or in Chalmette ZIP 70043, call and we’ll set up a free estimate for your Lennox system. Call (833) 749-5104. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Book Your Lennox Service in Chalmette Today
Call (833) 749-5104 for a free estimate on Lennox duct cleaning, coil cleaning or duct sealing in Chalmette. We work on your Lennox equipment as an independent provider, with professional-grade Rotobrush, Nikro and Abatement Technologies equipment on every job, and a flat price per system agreed before work starts. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at New Orleans Duct Cleaning.